Figure 1. The general arrangement of a three phase waveform.
Computer Numerical Control Machine (CNC) at Nickerson
Horizontal Lathe
Custom shapes cut from raw materials.
Figure 3. Three phase power has three identical sine waves overlapping at an offset of 2π/3 radians or 120°. When one phase reaches an x-intercept or node the next phase is only 30° and approximately 5.6 milliseconds from reaching its crest.
“NSF/ANSI 61.” NSF RSS. The Public Health and Safety Organization, n.d. Web. 07 June 2017.
National Pump Vertical Turbine Pumps, API 610
Impeller wear ring
Gorman-Rupp SF Series® Submersible Solids-handling Pump
Bowl wear ring
Utah Lake Cascade Pump
Machinist at Nickerson Company running a state-of-the-art CNC machine.
SF Series®
Super T Series® Engine Driven
Horizontal Lathe
Computer Numerical Control Machine (CNC) at Nickerson
Impeller wear ring
Custom fabrication to a large part
Vertical Lathe
Well Pump Installation
Figure 2. A simple sine wave with a period of 360° and an amplitude of 1. In single phase power the x-intercepts are 180° from each other. A full period is 360°. A single phase motor has a crest approximately every 16.5 milliseconds giving the motors a tendency to vibrate more, which may contribute to a shortened bearing life.
Parley’s Water Treatment Plant. Photo credit SLCdocs.com
80 Series® Engine Driven
Close-Coupled Vertical Turbine
3800 Series, Single Stage End Suction
CNC machine, where computers are used to control the movement and operation of the mills, lathes, and other cutting tools.
